Dowel Pins
dowel-pins
Metric Dowel Pins
Precision Ground Dowel Pins are used in a variety of applications and are generally made to fractional diameters and lengths. Dowel Pins are machined with a chamfer on one end and a radius on the other for easy installation. Dowels are made from 4037 Alloy Steel, 303 and 316 Stainless Steel, and 360 Brass. All Stainless and Brass Dowels are generally non-magnetic and corrosion resistant, however, they are not very hard and can be bent or dented easily. Hardened ground Alloy Steel Dowel Pins do not bend, dent, or break very easily because they are case hardened to Rockwell HRC 60 and have a core hardness from HRC 52-58. Alloy Dowel Pins are excellent for applications where high strength is required. Though these pins are not corrosion resistant they can be coated with a black oxide finish to help reduce their tendency to rust. /Asset/Dowel-Pins-Ground--Bulk.jpg Pull Dowel Pins
Precision Ground Dowel Pins are used in a variety of applications and are generally made to fractional diameters and lengths. Dowel Pins are machined with a chamfer on one end and a radius on the other for easy installation. Dowels are made from 4037 Alloy Steel, 303 and 316 Stainless Steel, and 360 Brass. All Stainless and Brass Dowels are generally non-magnetic and corrosion resistant, however, they are not very hard and can be bent or dented easily. Hardened ground Alloy Steel Dowel Pins do not bend, dent, or break very easily because they are case hardened to Rockwell HRC 60 and have a core hardness from HRC 52-58. Alloy Dowel Pins are excellent for applications where high strength is required. Though these pins are not corrosion resistant they can be coated with a black oxide finish to help reduce their tendency to rust. /Asset/Dowel-Pins-Bulk-Raw-1.jpg Metric Pull Dowel Pins
Precision Ground Dowel Pins are used in a variety of applications and are generally made to fractional diameters and lengths. Dowel Pins are machined with a chamfer on one end and a radius on the other for easy installation. Dowels are made from 4037 Alloy Steel, 303 and 316 Stainless Steel, and 360 Brass. All Stainless and Brass Dowels are generally non-magnetic and corrosion resistant, however, they are not very hard and can be bent or dented easily. Hardened ground Alloy Steel Dowel Pins do not bend, dent, or break very easily because they are case hardened to Rockwell HRC 60 and have a core hardness from HRC 52-58. Alloy Dowel Pins are excellent for applications where high strength is required. Though these pins are not corrosion resistant they can be coated with a black oxide finish to help reduce their tendency to rust. /Asset/Dowel-Pins-Bulk-Raw-2.jpg Stainless Steel and Brass Dowel Pins
Stainless Dowel Pins, also referred to as Parallel Pins, are commonly used to retain parts in a fixed position or to preserve alignment. Accurately mcahined to plus 0.0002", minus 0.0000" of the stated diameter and ±0.010" of the length, they are chamfered at both ends for easy insertion. A selection of sizes and lengths is a useful addition to the well-equipped shop or laboratory. /Asset/Dowel-Pins-Ground--Bulk-2.jpg 